EL Operating Theory:
EL is an equipment that converts electronic power to light. The
general working voltage and frequency of EL lighting source can be
turned from AC40V to AC220V and frequency can be turned from 50Hz
to 4000Hz. Increasing the voltage can increase the lighting degree
of EL. Increasing frequency has the same function, but the color of
the EL lighting source might be blue.
EL Illuminating Theory
Theory is the material layer converts the electrical power into
light, illustrating as the following:
EL Life Time. Lighting Degree:
EL lighting source is not the same as the traditional one to cut
off immediately. But after a long time use, the lighting degree
will reduce little by little. Voltage, frequency, temperature, and
humidity are all the important factors that affect the EL life
Common EL: 150CD(m2), halflife: 2000 hrs lifetime: 8000 hrs/50
CD/m2 60R. H.
High light EL: 300CD(m2), halflife: 2000 hrs lifetime: 8000 hrs
/100 CD/m2 60R. H.
EL Weight, Thickness and Bend Toughness:
EL is light and slim. Generally, bending above 3cm can be
acceptable, and can make any form you like, just like a paper,
which is the main characteristic of EL. Average parameter as
follows; But to some special order, the parameter may change.
Everage weight: 0.1-0.2g/cm2
Everage thickness: 0.4mm-0.7mm
EL Edge Closed:
In the lighting space, this is at least 0.1cm closed round the
edge. If the closed edge is toothin, it may cause mini-change. So
it will be suggested that closed edge should keep the suitable
The basic standard illuminating ground of EL are blue-green, blue,
pink/white. Besides the basic color, in the special range, we can
make bright-colored effect by using the combination of special
painting dyes and color sheet.
At present, the maximum dimension we can make is within
Driven Source Of EL--INVERTER:
The cause of the lighting source is driven by a matched driver.
That the voltage and frequency that driven the EL depend on
thecondition of the square, lighting degree, using environment,
life time ect.
We can design the EL driver according to customers' requirements,
1. Using DC 3V. 6V. 9V. 12V battery power to design Inverter to
drive the lighting of EL.
2. Using DC12, 24V power of car and motorcycle to design Inverter
to drive the lighting of EL.
3. Using indoor power of AC110-230V to design Inverter to drive the
lighting of EL.
The Advantage Of EL Poster
1. Extra save electric power, short-wave lighting, no radiation,
bright and remarkable in the night, which can attract the
2. The capacity of focusing light is strong. The distance may be
very far but strong attraction.
3. Extra-thin, light. It's easy to manufacture and put in use and
save engineering cost. Upgrading the human resources
4. As its easy to be equipped, it has strong scattering capacity
and ad mobilization.
5. With its novelty and attraction, it can get effect of ad or
6. EL can be made by the clients. Needs. And we can produce EL
product of different dimension and shape you want.
7. Besides making continuous light and flash function, it also can
be made soft dimming or multisection flash mode,
So we can meet different customers requirements.&
Super Luminance EL Poster, EL Poster, EL Advertisement Images